Crown XTi 2000 Buy from Unique Squared and get these items FREE! UPS Shipping  Manufacturer P/N: GXTI2000 No Reserve Price!

Minimum Guaranteed Power, 1 kHz	XTi 2000
Per channel, both channels driven
Stereo, 2 ohms (per ch.) Stereo, 4 ohms (per ch.) Stereo, 8 ohms (per ch.) Bridge-Mono, 4 ohms Bridge-Mono, 8 ohms	1000W* 800W 475W 2000W* 1600W
With 0.5% THD. *With 1% THD

The XTi Series of Crown amplifiers are professional tools designed and built for portable PA applications. The series includes three models which are identical except for output power: XTi 1000, 2000 and 4000. All are rugged and lightweight, and offer unmatched value in their class.

• Integrated proprietary DSP with LCD front panel display
   
• Accurate, uncolored sound with very low distortion for the best in music and voice reproduction
   
• Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults
   
• Extremely versatile, handling a wide range of speaker impedances and outputs
   
• Switch-mode universal power supply
   
• Speaker presets for crossover frequencies, EQ, limiting, and delay
   
• All products fill 2U rack spaces and weigh under 17 pounds; weight sets a new standard in lightweight amps (20% less)
   
• Speakon® and binding post outputs, XLR inputs and loop-thrus
   
• Comprehensive LED status per channel
   
• Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

XTi 1000, 2000, 4000 Back Panel

Specifications

Sensitivity (volts RMS) for full rated power at 4 ohms	1.4V
Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz)	+0/–1 dB
Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted	100 dB
Damping Factor (8 ohm): 20 Hz to 400 Hz	> 500
Input Stage	Input is electronically balanced and employs precision 1% resistors.
AC Line Current	XTi 2000: 6.9A At idle: Draws no more than 90 watts.
Crosstalk (below rated power) 20 Hz to 1 kHz	> 70 dB
Input Impedance (nominal)	20 kilohms balanced, 10 kilohms unbalanced
Load impedance (note: safe with all types of loads) Stereo Bridge mono	2-8 ohms  4-16 ohms
Voltage Gain (at 1 kHz, 8 ohm rated output)	XTi 2000: 32.9 dB.
Maximum Input Signal	+22 dBu typical
Operating Temperature	0° C to 40° C at 95% relative humidity (non-condensing)
AC Line Voltage and Frequency Configurations Available (± 10%)	100-240v 50/60Hz
Ventilation	Flow-through ventilation from front to back
Cooling	Heat sinks and proportional-speed fan
Dimensions: Width, Height, Depth (behind mounting surface)	EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x12.25 in. (31.1cm) D
Net Weight, Shipping Weight	18.5 lb (8.4 kg), 21.5 lb (9.8 kg)

For more information check out the Cut Sheet &/or the Operating Instructions

HiQnet is a communications protocol or language with which all device-types within the full audio signal path can communicate.

Co-developed and shared by elite engineers from all the brands within the Harman Pro group, HiQnet merges the best features of all previous brand-independent communications protocols and thereby benefits from years of combined experience and is simultaneously optimized for all components of the full professional audio system.

Warranty Information: