You are bidding on a used Markbass LMII head. I bought this new and it is approximately 8 months old. I have used it primarily at home and about 6 gigs. It has never been pushed hard and I have never had to turn the volume past 12 o'clock. The amp is in excellent condition and everything is 100% functional and was used/stored in a non smoking home. The original owner's manual, power cord, box and packing material are all included. This head just received the 2008 Bass Player Readers' Choice Award. Here are the specs:
INPUTS
INPUT
impedance 500 Kohm, max. voltage 15 Vpp
BALANCED INPUT (XLR)
impedance 22 Khom, max. voltage 25 Vpp
EFFECT RETURN
impedance 22 Kohm, max. voltage 25 Vpp
CONTROLS
GAIN
–80 dB to +23 dB range
MASTER VOLUME
GROUND LIFT
switch on rear panel
EQUALIZATION
LOW
center frequency: 40 Hz; level: ±16 dB
LOW MID
center frequency: 360 Hz, level: ±16 dB
HIGH MID
center frequency: 800 Hz, level: ±16 dB
HIGH
10 kHz shelf, level: ±16 dB
VPF (Variable Pre-shape Filter)
center frequency 380 Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250 Hz–20 kHz (cut)
OUTPUT
LINE OUT
balanced XLR, max. voltage 10 Vpp
EFFECT SEND
unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
unbalanced, max. voltage 25 Vpp
SPEAKER OUT
speakon, 1/4"
OTHER
WEIGHT
6.39 lbs / 2.9 kg
DEPTH
10.1 in. / 25.6 cm
WIDTH
10.87 in. / 27.6 cm
HEIGHT
2.8 in. / 7.1 cm
OUTPUT POWER
300W RMS @ 8 ohm, 500W RMS @ 4 ohm
POWER REQUIREMENT
100/120V; 230V; 240V
50/60Hz
The minimum ohm load for all Markbass heads is 4 ohms.
The Little Mark II's balanced XLR output is factory preset to POST-EQ, but can be switched to PRE-EQ by any authorized Markbass service technician.